← All articles

How Editors Normalize Podcast Loudness So Your Episode Isn't Too Quiet on One Platform and Too Loud on Another

The Content Factory team · November 15, 2026

You finish a session, the audio sounds great in the studio, and then you check the published episode on your phone. On YouTube it's fine. On Spotify you're cranking the volume. On Apple it clips when your guest laughs. Nothing was wrong with the recording. What's missing is loudness normalization, and it's one of the least glamorous and most important steps in post.

Here is how editors actually handle it, why it matters more than people think, and what to ask for when you hand off a session.

Why your podcast sounds different on every platform

Streaming platforms do not play your file at the exact level you uploaded. Each one runs its own loudness check and turns your episode up or down to hit a target. If you deliver an episode that's way off their target, the platform's adjustment can make it sound thin, squashed, or oddly quiet compared to the show people listened to right before yours.

The unit everyone uses for this is LUFS, which stands for Loudness Units Full Scale. You do not need to memorize the math. You just need to know that it measures perceived loudness over the whole episode, not just the loudest single moment. Two episodes can hit the same peak and still feel very different in volume. LUFS is what captures that difference.

The targets editors actually aim for

Different platforms behave differently, but most podcast work lands in a predictable range:

A common, safe approach is to master the main episode around -16 LUFS integrated, keep true peaks below about -1 dB to avoid clipping, and then make small adjustments for a video version. The goal is not to chase a perfect number on every service. It's to land in the right neighborhood so no platform has to make a drastic correction.

Loudness is not the same as louder

The instinct most people have is to just turn everything up. That's where episodes get wrecked. Slam the levels and you crush the dynamic range, so a quiet thoughtful moment and a big laugh end up at the same flat volume. It sounds tiring after ten minutes.

Good loudness work is about consistency, not volume. An editor is balancing the whole episode so the host and guest sit at a similar level, the intro music doesn't blast after a soft open, and nothing forces the listener to reach for the volume knob mid-episode. You hit the loudness target by balancing first and raising overall level last, not by squashing everything into a brick.

What happens when two people record at different levels

This is the real world of multi-guest recording. One person leans into the mic, another sits back. One has a booming voice, another is soft-spoken. Before anyone touches a loudness target, an editor levels each person individually so they sit together naturally. In a studio where each mic is on its own track, that's straightforward. When everyone is recorded to a single mixed file, it gets much harder to fix cleanly, which is one of the reasons separate tracks matter so much. That tracking happens on the recording side in a proper video podcast studio, and it makes the loudness stage faster and better.

Why the video version needs its own pass

If you publish both audio and video, you cannot assume one master works everywhere. The YouTube version usually wants a slightly louder target than the podcast feed. Music beds often need to come up a hair under video because viewers expect a bit more energy. And the video platform's own normalization behaves differently from an audio app's.

This is part of why editing a video podcast takes more time than audio alone. You're not just exporting the same file twice. You're delivering a master tuned for how each platform plays it. If you want the full picture on how that work is priced, our editing services page breaks down what's involved.

Short clips need their own loudness thinking too

Clips for Reels, Shorts, and TikTok are played at full phone volume, usually with the user scrolling fast. A clip that's correct for a quiet podcast feed can feel weak in a loud, fast feed full of music-heavy content. Editors often master clips a touch hotter and tighter than the full episode so your clip holds its own when it autoplays between everyone else's. It's the same source audio, but a different loudness goal for a different environment.

How to tell if your loudness is off

You do not need a meter to catch the obvious problems. Listen on your phone at a medium volume with earbuds. Then play someone else's established podcast right after yours. If you have to jump the volume up or down to match, your levels are off. If the quiet parts disappear and the loud parts hurt, your dynamics are crushed. If your intro music buries the first words of the host, your balance is off.

Those are all fixable in post, and they're all cheaper to fix when the recording was clean and tracked separately in the first place.

What to hand your editor

If you want loudness handled right, give your editor a few things up front. Tell them every platform you publish to, because that determines the targets. Tell them whether there's a video version. Note any music beds or sponsor reads that need to sit at a specific level. And hand off separate tracks per mic whenever possible so each voice can be balanced on its own before anything is normalized.

When you record with us, you leave with your files the same day, already tracked cleanly, which is the best possible starting point for a mastering pass. You can see how a typical session is structured and priced on our pricing guide.

The quiet step that makes everything else sound professional

Nobody notices good loudness normalization. That's the point. When it's done right, your episode plays at the volume people expect, sounds steady from open to close, and matches the shows it sits next to in a feed. When it's done wrong, listeners feel it immediately even if they can't name what's bothering them, and some of them just leave.

If you're recording a show you plan to publish across multiple platforms, build this into your post plan from the start instead of patching it later. Ready to record in a room set up to make this easy? Book a session and we'll make sure your files are ready for a clean master the moment you walk out.

Record with us in Downtown San Diego.

Engineer-run sessions from $350 - you show up, we handle everything, and you leave with your files the same day. First time? Grab a free 15-minute consult to plan your shoot, no cost.

Book a session Tour the studio for $1

Questions? Call (619) 853-3481 - answered 24/7.